Mounting Hardware
iFootage Spider Crab Vehicle Suction Cup VS-146
- For Use with Spider Crab Vehicle Mount
- Create Smooth Motion Shots on Vehicles
- 1/4"-20 & 3/8"-16 Screws/Thread Mounts
- 30 kg Maximum Payload
In stock
Ships tomorrow
$236.00
You Pay:
$179.00
$236.00
Avenger C339 Grab Clamp
Zinc Steel Construction, 12.5 mm Hole, Load Capacity: 330 lb
In stock
Ships tomorrow
$359.00
You Pay:
$188.00
$359.00
Avenger D520LB 40" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$169.00
Avenger D500LB 20" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$159.00
Manfrotto 123 Pivoting Boom Clamp for Super & Heavy Duty Boom
- Pivoting clamps
- For super/heavy duty booms
- Use with 35 mm diameter boom shafts
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$189.00
Impact Double Ball Joint Head with Super Clamp and Camera Platform Kit
3 piece kit to support cameras up to 2.3 kg
In Stock with Supplier
Usually ships in 4 - 6 working days
You Pay:
$169.00
Matthews Matthellini Clamp (2" End Jaw, Silver)
Provides strong, solid gripping
Usually ships in 6 - 8 weeks
You Pay:
$189.00
Tilta Universal Action Camera Suction Cup (4.5") Mounting Kit
- Mini Articulating Arm
- Secure Mounting to Vehicles
- Compatible with GoPro Hero 11, DJI Action 3, Insta360 X3
- Design Based on 1/4"-20 Mounting Points
- Aluminium Alloy, Rubber, and Stainless Steel Construction
Usually ships in 2 - 4 weeks
You Pay:
$159.00
Avenger F1100 6.0" Pump Cup with Fixed Baby Pin
Rubber and Aluminum Alloy Construction, 5/8" Non-swiveling Pin
Special Order
Contact us for an ETA
You Pay:
$169.00
Manfrotto 038 Double Super Clamp
Set of two super clamps fastened together at fixed right angles.
Usually ships in 2 - 3 weeks
You Pay:
$179.00
9.SOLUTIONS Suction Cup
- Load Capacity: 1.9 kg
- Equipped with Cheese Block
- Multiple 1/4"-20 & 3/8"-16 Taps
- 2 x 3/8" Rod Clamps
Usually ships in 4 - 6 weeks
You Pay:
$179.00
Avenger D520L 40" Extension Arm (Chrome-plated)
Chrome-plated Steel and Aluminum Alloy, Permanently Attached Grip Head
Special Order
Contact us for an ETA
You Pay:
$159.00
Avenger F830 Baby to Junior Swivel Pin
Zinc-Plated Steel Construction, 5/8" Receiver, 5/8" Pin
Special Order
Contact us for an ETA
You Pay:
$169.00
Kupo KCP-601-L Super Viser Clamp (End Jaw, 17.5")
- Steel and Aluminium Construction
- 30kg Load Capacity
- Hex Receiver and 5/8" Knurled Pin
Usually ships in 8 - 12 weeks
You Pay:
$179.00
Kupo KSC-05 Pump Suction Cup with Detachable 5/8" Swiveling Adapter (6")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Kupo KSC-09 Suction Cup with 34cm Support Arm
- Suction Cup Diameter: 6"
- Tube Diameter: 2"
- Support Arm Length: 34cm
- Vacuum-Loss Warning Indicator
- Mount Cameras and Equipment on Vehicles
Usually ships in 8 - 12 weeks
You Pay:
$169.00
Kupo KCP-280B Double Gag Grip Head
- Mount two light control frames
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Inovativ Baby Pin Bracket with Pin for Dual Bar
- Provides offset support for Dual Bar
- Add Monitor to Dual Bar
- Compatible with Baby Pin Accessories
- Connects to Bar with 3/8"-16 Screw
Contact us for an ETA
You Pay:
$169.00
Inovativ AXIS Weight Hanger
- Keep Your Grip Stand Stable
- Compatible with AXIS or American Stands
- Steel Construction with Foam Core
- Hook for Weight Bag
Contact us for an ETA
You Pay:
$169.00
Inovativ Corner Plug With Baby Pin For Apollo, Deploy & Center Mast Bracket
- Baby Pin is 6061 aluminium with clear anodise
- Corner Plug machined 6061 T6 aluminium and anodised orange
- For Apollo, Deploy & Center Mast Bracket
- Useful to mount Inovativ's DigiSystem Pro and Lite
Contact us for an ETA
You Pay:
$169.00
Kupo KCP-817 Quick Action Jr. Pipe Clamp (22-53mm)
- Quick-Action Locking Device
- Clamp Any Pipe
- Heavy-Duty Gravity Casting
Usually ships in 8 - 12 weeks
You Pay:
$159.00
Matthews Infinity Arm Anti-Rotation Tip
- 3/8” threaded pin mount with indexing pins
- Precision machined ball mount pairs with Infinity Arm
- Black anodize coating
Usually ships in 6 - 8 weeks
You Pay:
$159.00
Kupo KCP-440 4.5" Centre Grip Head with 28mm Pin
- 2 Rotating Discs Attached to 1-1/8" Pin
- 5/8" and 3/8" V-Jaws
Usually ships in 8 - 12 weeks
You Pay:
$169.00
Kupo KCP-608 Super Viser Clamp Center Jaw with Indexed Baby Pin
- Made from aluminum and steel
- 5/8" (16mm) baby pin
- Rotatable and lockable pin
- 8 positions at 45-degree increments
- Fixed centre jaw for stability
- 360-degree swivel capability
Usually ships in 8 - 12 weeks
You Pay:
$159.00