Tripod Accessories
Manfrotto 055LC Leveling Center Column for Select 055 Series Tripods
- 50mm Half Ball
- Aluminium Construction
- 3/8"-16 Mounting Thread
Usually ships in 2 - 3 weeks
You Pay:
$409.00
Manfrotto 055XSCC Shorter Center Column for Select 055 Series Tripods
- Shorter Than Stock Column
- 3/8"-16 Mounting Thread
- Bubble Level
Special Order
Contact us for an ETA
You Pay:
$159.00
Desmond Long Shaft 1/4"-20 Cap Screws (10-Pack)
Stainless Steel, Slot and Hex Socket, For QR Plates
Usually ships in 1 - 2 weeks
You Pay:
$21.95
Desmond Standard 1/4"-20 Cap Screws (10-Pack)
Stainless Steel, Slot and Hex Socket, For QR Plates
Usually ships in 1 - 2 weeks
You Pay:
$25.95
Desmond Long Shaft 1/4"-20 Male and Female Screws with Plastic Base (10-Pack)
Extended Shaft, Plastic Base Allows Hand-Tightening
Usually ships in 1 - 2 weeks
You Pay:
$39.95
Desmond Short Shaft 1/4"-20 Male and Female Screws with Plastic Base (10-Pack)
Short Shaft, Plastic Base Allows Hand-Tightening
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$35.95
Manfrotto Suction Cup/Retractable Spike Foot for (695CX monopod)
- For the 695CX Monopod
- Broad, rubber foot is great for hard, slippery surfaces
- Suction cup increases stability
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Manfrotto Suction Cups/Retractable Spike Feet (Set of 3)
- For the 190CXPRO4 Tripod
- Broad, rubber feet great for hard, slippery surfaces
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$239.00
Manfrotto Retractable Spiked Foot
- For the 695CX Monopod
- Tough spike made from durable alloy
- Surrounded by a hard rubber retractable foot
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$85.95
Manfrotto Retractable Spiked Foot Set
- For the 190CXPRO4 Tripod
- Tough spike made from durable alloy
- Surrounded by a hard rubber retractable foot
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$179.00
Manfrotto 120 - Tripod Adapter
Converts tripod head screw from 3/8' to 1/4'
In Stock
Usually ships in 2 - 3 working days
You Pay:
$62.95
Manfrotto 120-38 Tripod Spacer for Tripod Columns
- For 3263 Deluxe Geared Head
- Permits 90 Degree Head Tilt
- Compatible with Most Columns
- Can be Used as 3/8" F to 3/8" M Adapter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Miller Standard Camera Plate for AIR, DS10, DS20, Compass, CompassX Heads (6cm)
- For AIR, DS10, DS20, Compass, CompassX
- Standard Plate Size
- 2.4" of Travel
- 1/4"-20 and 3/8"-16 Camera Screws
- Sliding Quick Release Design
Usually ships in 2 - 3 weeks
You Pay:
$149.00
Miller Short Camera Plate for AIR, DS10, DS20, Compass, CompassX Heads (3cm)
- For AIR, DS10, DS20, Compass, CompassX
- Short Plate Size
- 1.2" of Travel
- 1/4"-20 and 3/8"-16 Camera Screws
- Sliding Quick Release Design
Usually ships in 2 - 3 weeks
You Pay:
$119.00
Manfrotto 120DF - Converter Plate (Indent Only)
- For use of 3/8" Male accessories
- Joint for arms
- Converts 3/8'' screw to 1/4''
- Allows using accessory arm as column extension
- Made of aluminium
In Stock
Usually ships in 2 - 3 working days
You Pay:
$59.95
Miller Articulated Pan Handle with Extender for Cineline 70 Fluid Head (38cm)
- Multi-positional pan handle grip
- Includes 1234 pan handle short grip for dual control
- Includes 1238 serrated handle clamp extender
Usually ships in 2 - 3 weeks
You Pay:
$1,739.00
Miller Short Pan Handle for Cineline 70 Fluid Head (21cm)
- Short grip for greater control
- Durable hi-strength black alloy tubing
- Comfortable rubber pan handle grip
Usually ships in 2 - 3 weeks
You Pay:
$419.00
Miller Tele Handle Rod/Clamp with Extension for Skyline 70 and Cineline 70 Fluid Heads
- High strength
- Telescopic pan handle
- Extendable by 190mm
- Suits Cineline 70 and Skyline 70
- Extender allows for accessory mounting
Usually ships in 2 - 3 weeks
You Pay:
$1,719.00
Manfrotto 131D - Repro Arm for Tripods (Black)
Allows the positioning of two heads on a 90 degree perpendicular angle
In stock
Ships in 1 - 2 working days
You Pay:
$229.00
Manfrotto 131DDB - Accessory Arm for Four Heads
- Replaces #3153B
- Accessory arm for four heads
- With 3/8" screws
In stock
Ships in 1 - 2 working days
You Pay:
$369.00
Manfrotto 131TC Tablemount Geared Column with Clamp
- Replaces #3253
- 3.8 cm jawed clamp
- Fastens securely
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$629.00
Manfrotto 400PL-HIG - Accessory Plate for Geared Head
A plate that is 42mm high to offer maximum clearance (Indent Only)
Special Order
Contact us for an ETA
You Pay:
$56.95
Miller 1590 Protective Leg Covers for Solo Series Tripods (Set of 3)
- Length: 12.6"
- Weight: 8 oz
- Provides Comfortable Grip
- Neoprene Base
- Touch-Fastener Seams
Usually ships in 2 - 3 weeks
You Pay:
$119.00
Manfrotto Suction Cup/Retractable Spike Foot for (694CX monopod)
- Fits only the 694CX monopod
- Broad, rubber foot is great for hard, slippery surfaces
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$129.00
Manfrotto Suction Cups/Retractable Spike Feet (160SCK3)
- For the 190XB, 190XDB, 190XPROB, 190CX3, 190CXPRO3, & 055CXPRO4 Tripods
- Broad, rubber feet great for hard, slippery surfaces
- Suction cups increase stability
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$179.00
Manfrotto 166 Tripod Utility Apron
- Replaces #3146
- 3 compartments hang
- Leather belt attachments adjust to most tripod leg diameters
- Allows for storage space beneath center column
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Manfrotto 190LC Leveling Center Column for Select 190 Series Tripods
- 50mm Half Ball
- Aluminium Construction
- 3/8"-16 Mounting Thread
Usually ships in 2 - 3 weeks
You Pay:
$389.00
Manfrotto 190XSCC Shorter Center Column for Select 190 Series Tripods
- Shorter Than Stock Column
- 3/8"-16 Mounting Thread
- Bubble Level
In stock
Ships in 1 - 2 working days
You Pay:
$169.00
Manfrotto 200LT-PL-PRO Technopolymer RC2/Arca Quick Release Plate
- Ultra-lightweight and compact photo plate
- Compatible with RC2 & Arca-type head attachments
- High-quality technopolymer construction
- Two rubber inserts maximise grip on the most angled shots
- Universal 1/4'' screw attachment
In Stock
Usually ships in 2 - 3 working days
You Pay:
$62.95
Manfrotto Suction Cups/Retractable Spike Feet (204SCK3)
- For the 055CX3 & 055CXPRO3 Tripods
- Set of three
- Rubber Feet
- Suction cups increase stability
In stock
Ships in 1 - 2 working days
You Pay:
$129.00
Manfrotto 208 - Platform Adapter for Camera Mounting
Provides a mounting plate with a 3/8 inch screw.
In stock
Ships Monday
You Pay:
$51.95
Manfrotto 208 - Camera Mounting Adapter with Hexagonal Pin
Provides a mounting plate with a 3/8 receptor and provides more grip
In Stock
Usually ships in 2 - 3 working days
You Pay:
$62.95
SmallRig 2122 L-Bracket for Sony A7RIII/A7III/A9
L-Bracket comprised of base and side plate provide more comfortable grip
In Stock with Supplier
Usually ships in 2 - 4 weeks
$106.00
You Pay:
$95.00
$106.00
Manfrotto 22SPK3 Spiked Feet for Select Manfrotto Aluminum Tripods (Set of 3)
Available to order today
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$239.00
Manfrotto 230 Tripod Snow Shoe Set
- Set of 3
- 14 cm diameter
- Attach easily
- Provide necessary stability
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Manfrotto 236 Surveyors Spiked Foot - for 679, 680 & 681 Series Monopods
- Replaces #3257
- 25mm diameter hole
- With 20mm adapter
- Firmly plant into the ground
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$62.95
Manfrotto 244 Micro Arm With Anti-Rotation
This variable friction arm is extremely versatile and comes with a standard 3/8'' adapter.
Special Order
Contact us for an ETA
You Pay:
$259.00
Really Right Stuff Base Plate for Olympus OM-D E-M1X
- Arca-Type Compatible Dovetail Plate
- Optional Modular Plate
- Type II Black Anodised 6061-T6 Aluminium
- Adds Quick Release Functionality
- Anti-Twist Flanges
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$149.00
Manfrotto 248 Flash Adapter Screw for Metz Brackets
- For Use with 030 Hexagonal Plate
- 1/4"-20 Mounting Thread
- For Metz Flash Brackets
- Zinc Steel Construction
Special Order
Usually ships in 8 - 12 weeks
You Pay:
$33.95
Manfrotto 262 - Nikon Flash Adapter
Converts Nikon flash mount to universal flash bracket
Special Order
Contact us for an ETA
You Pay:
$18.95
Ulanzi VIJIM LS06 Extension Arm for Desk Mount Stand
- Professional Live Streaming Stand Equipment (For Camera/smartphone/microphone/video light)
- New upgrade arbitrary ballhead
- Industry pioneered "double anti-deflection" locking structure
- 2-stage extendable arms
- Enhanced version with load-bearing up to 1KG
- Pipe clamp bracket expansion
- Aviation aluminum alloy material
Usually ships in 4 - 6 weeks
You Pay:
$35.95
Manfrotto 273 - Survey Adapter
Converts tripod head screw from 3/8' threads to 5/8'
Special Order
Contact us for an ETA
You Pay:
$139.00
Ulanzi VIJIM LS10 Desk Mount Stand with Detachable Column
- Professional Live Streaming Stand Equipment (For Camera/smartphone/microphone/video light)
- Sturdy C-clamp
- Industry pioneered "double anti-deflection" locking structure
- Load-bearing up to 1KG
- Pipe clamp bracket expansion
- Aviation aluminum alloy material
Usually ships in 4 - 6 weeks
You Pay:
$36.95
SmallRig 2799 Mount for LaCie Portable SSD
- For LaCie Portable SSD.
- Attaches to Cage With Two Captive 1/4”-20 Screws.
- Secures SSD & USB Type-C Cable.
- Thumbscrew Fastener.
In stock
Ships Monday
$35.95
You Pay:
$14.00
$35.95
SmallRig 2814 Mount for LaCie Rugged SSD
- For LaCie Rugged SSD.
- Attaches to Cage With Two Captive 1/4”-20 Screws.
- Secures SSD & USB Type-C Cable.
- Thumbscrew Fastener.
In stock
Ships Monday
$56.95
You Pay:
$35.00
$56.95
SmallRig 2844 SONY FX9/FS7/FS7 MK2 Top Handle Special Screw
- Top handle special screw designed for SONY FX9/FS7/FS7 MK2.
- Provide a quick adjustment solution for the rod on the front of the SONY original top handle.
- Tinny and comfortable.
Usually ships in 3 - 4 weeks
You Pay:
$14.95
SmallRig 2854 Mounting Plate for Zhiyun-Tech CRANE 3S Handheld Stabilizer
- Designed for ZHIYUN CRANE 3S Gimbal.
- 1/4"-20 & ARRI 3/8”-16 Accessory Mounts.
- Connects to Gimbal via a Captive 3/8”-16 Screw & Locating Pins.
- Compatible with Original Sling Handle Adapter and SmallRig Handle 2636.
- Integrated Protective Rubber Pad.
In stock
Ships Monday
$37.95
You Pay:
$14.00
$37.95
Manfrotto 293 - Telephoto Lens Support
Ideal for telephoto lenses without a tripod collar - supports 2.5kg
Special Order
Contact us for an ETA
You Pay:
$239.00
SmallRig L-Bracket for Nikon Z 5/Z 6/Z 7 Cameras
- Arca-Type Compatible Dovetail Mount
- Quick Release Function on Both Axes
- Anti-Twist Design and Rubber pad
- 1/4"-20 Threaded Holes for Accessories
- Maintains Access to Camera Battery
In Stock with Supplier
Usually ships in 2 - 4 weeks
You Pay:
$75.00
Titan 3/8" to 1/4" Thread Adapter
Features 3/8" Female and 1/4" Male Threads
Usually ships in 1 - 2 weeks
You Pay:
$10.95