Items on Sale

• Lightweight Design
• Wireless Control
• CRI 96+
• TLCI 97+
• 5600K
• 172,000Lux (1m) at 5600K

• Lightweight Design
• Wireless Control
• 2,700 - 6,500K
• CRI: 96+
• TLCI: 97+
• 115,000Lux (1m) at 5600K

• Lightweight Design
• Wireless Control
• CRI 96+
• TLCI 97+
• 5600K
• 149,000Lux (1m) at 5600K

• Figure-8 Polar Pattern
• 20 Hz to 20 kHz Frequency Response
• 130 dB Maximum SPL
• 1.8 Micron Ribbon Element
• Internal Shock Mounting System

• Ergonomic silicone shoulder pad
• Built-in VCT-14 quick-release baseplate
• Top quick-release plate
• Adjustable extension arm
• Ergonomic handle surface

• Compact, easy-to-use console
• Studio-grade audio inputs
• Up to 4K30 / 2K60 streaming
• Up to 2K120 / 4K60 pass-through
• Four customisable SMART pads

• Compact & Lightweight
• Intelligent BMS Chip
• Various Interfaces for Wide Compatibility
• Practical OLED Display
• Premium Li-Battery

• Large-Diaphragm (1") Gold-Sputtered Condenser Capsule
• Cardioid Polar Pattern
• Extended Frequency Response
• 32-bit Float Digital Output
• XLR and USB Connectivity
• Exceptionally Low Self-Noise (4dBA)

• Suitable for Shotgun Microphones
• Lightweight
• Extends from 0.85 m to 3 m
• Five Sections
• Intuitive Twist-Lock Mechanic

• Formfitting cage with new streamlined design
• Ultra-light and high-strength carbon fibre
• Dedicated HDMI cable clamp
• 1/4"-20 threaded holes, ARRI 3/8"-16 locating holes
• Cold shoe mount, NATO rail, QD socket
• Arca-Swiss quick-release plate

• Rich, detailed audio capture
• Professional dynamic USB microphone
• Superior room noise rejection
• Internal DSP for advanced audio processing
• Pop shield and shock mount included

• Matched Pair
• 1 dB or Less Sensitivity Between Mics
• Cardioid Polar Pattern
• 12.70 mm Gold-Plated Membrane Capsule
• Permanently Polarised

• Dedicated pro kit for SONY FX6
• Features two top plates that suit the original handle
• ARRI baseplate allows quick adjustment based on the center of gravity of camera
• Manfrotto quick release plate on the top of the baseplate that enables switch between tripod and handheld mode

• Omnidirectional Pattern
• Shock Mounted Capsule Reduces Noise
• Internal Pop Screen Reduces Plosives
• Frequency Response Optimised for Speech
• Die-Cast Aluminium Body & Matte Finish

• Styled in a vintage heavy metal fashion
• Metallic rust and leather brown
• Shutter button adapter enhances shutter control
• Hot shoe cover with a bubble level

• Formfitting Camera Cage for Canon R5/R6
• Top Handle, HDMI/USB Cable Clamp
• Maintains Access to Ports & Controls
• 1/4"-20 & 3/8"-16 Accessory Threads
• Shoe Mount, Integrated Arca-Type Base

• Follow Focus Controller
• Wireless Handgrip and Handgrip Adapter
• Run/Stop REC Function Support
• Right- or Left-Hand Support
• Can Power Motor Using USB-C Cable

Aluminium-Alloy Cage for All-Round Protection Multiple Accessory Mounting Points Accomodates Atomos Sun Hood or Included SmallRig Sun Hood Includes Cable Clamp Scratch-Proof, with Anti-Fingerprint Screen Protector

• Compatible with mirrorless camera and DSLR
• Included baseplate and a QR plate
• Equipped with 1/4"-20 and 3/8"-16 threaded holes

• Features multi-model electronically controlled REC function
• Compatible with Sony, Panasonic, Fujifilm, Z Cam
• Ergonomically designed to improve grip experience
• Made of high-quality wood, secured with ARRI rosette

• A form-fitting cage designed for Atomos Shogun 7.
• NATO rails on the top and bottom.
• Multiple 1/4’’-20, 3/8’’-16 and ARRI locating hole.
• HDMI cable clamp included.
• Sunhood included.

• Revolutionised zoom in/out design
• New heat dissipation technology
• Improved illumination
• Works with SmallRig 8-leaf Barn-doors
• Storage bag for greater protection

• A form-fitting cage designed for Atomos Shinobi.
• NATO rails on the top and bottom.
• 1/4’’-20, 3/8’’-16 and ARRI locating holes.
• HDMI cable clamp included.

• 32" (820mm) Horizontal Reach
• 33" (840mm) Vertical Reach
• Touch-Fastener Cable Wraps
• Desk-Clamp Included
• Desk-Insert Hardware

• Vlogger, Run & Gun, Voiceover, Podcaster
• For Cameras, Mobile Devices & Computers
• Runs on Plug-In Power or USB Power
• Simple Operation with No Controls
• 3.5mm TRS Output to Camera or Headphones

• 24-Bit/48 kHz Resolution Capture.
• Cardioid Polar Pattern.
• 3.5mm Headphone Monitoring Jack.
• Direct Mix Control.
• No Drivers Required.

• Focus Controller for Cine/DSLR Lens
• Works with Wireless Handgrip & Motor
• Power-Failure Memory
• Replaceable Marking Disk
• Up to 20-Hour Battery Life
• A-B Point Settings & Vibrating Warning

• Built-in 15mm rod clamps
• Strong compatibility
• Anti-false-touch design
• Compatible with DJI RS series
• Modular design

• Arca-Swiss Compatible Quick Release
• Adjustable Centre of Gravity
• Detachable Telescopic Handle
• 1/4"-20 Threaded Accessory Mounting Hole

• Modular design: works with handgrips to cater to various scenes.
• Functional buttons: supports videoing / photographing, joystick control, mode switch, centring / locking, sleep mode
• Wireless control: freely controls stabiliser in an array of scenes (max range: 100m).
• Bi-directional magnetic attraction: quickly attaches 3919 and 3954.

• For Wireless GO II Microphones
• Accommodates both transmitters and the receiver
• Integrated battery for three full recharges
• Rugged enclosure and zip system

• Offers comfortable run-and-gun shooting experience
• Flexible and compatible with both big and small cameras
• Features memory foam
• Weights only 302g in total
• Could provide more mounting options

• 32-bit Dual-Core Intelligent Audio Processing Chip
• Built-In Sound Card for Instant Creation
• Dual-Channel (24 bit / 48k Hz) Studio Standard Audio Quality
• Multi-Capsule Array for 360° Sound sSmpling
• Stereo / Omnidirectional / Cardioid/ Bi-Directional Modes

• Dedicated one-handed video kit
• Varied accessory mounts
• SmallRig quick-release design
• Maintains access to all buttons
• All-metal full cage

• Formfitting Camera Cage
• Arca-Type Base, Shoe Mount, NATO Rail
• 1/4"-20 & 3/8"-16 Accessory Threads
• 1/4"-20 Screw, QD Mounts, Strap Slots
• Maintains Access to Camera Controls
• Durable Aluminium Construction

• Screw-In Reduction Rings for SmallRig Matte Box 2660
• Provides Filter Thread to Attach Circular CPL and Variable ND Filters
• Comes with a Drawstring Storage Bag for Easy Storage and Protection.
• Features Anti-Twist Edge to Prevent Accidental Disconnection

• Quick switch between horizontal and vertical
• Gives full access to ports and LCD screen
• Arca-type plate and Manfrotto RC2 plate
• Quick-release plate supports handle
• Baseplate can be used separately

• Formfitting Aluminium Camera Cage
• Tabletop Mini Tripod with Ball Head
• Mic Adapter Holder
• Multiple 1/4"-20 Threads, Shoe Mounts
• Mount Microphone, Light, and Accessories

• One Top Flag Opens 180°
• Left- and Right-Side Flags Extend 38°
• Quick Release Design, 1/4"-20 Screw
• Carbon Fibre and Aluminium Construction

• Classic 2:3 soft-box for layered light spread
• Industrial-grade cloth with highly-reflective coating
• Made of sturdy and durable metal
• Honeycomb grid and inner/outer diffusers

• Specially designed for iPhone 14 Pro Max
• Wireless control side handle
• Multiple mounting holes
• Allows attaching M-mount or 17mm threaded lenses

• Clamp-on rings for SmallRig Matte Box 2660
• Split design for a secure fit
• Quick disassembly and assembly, efficient and time-saving
• Anti-twist edge prevents accidental disconnection and ensures safety
• Drawstring bag for easy storage and protection from scratches

• For PG2-R Pistol Grip & SM Shockmounts
• Neutrik & Switchcraft XLR Connectors
• Strain-Relief Junction Box
• 43 cm Cable Length