Recording

• 2x 3/4" Tweeters
• 2x 3" Woofers
• Bluetooth Capability
• 2x RCA Inputs
• 1x 3.5mm Input

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Buffers Signal for Long Cable Runs.
• Boost Circuit Adds Volume and Drive.

• Plug a Mic into a Mobile Phone / Camera
• Auto-Sensing Output for TRRS/TRS Ports
• XLR Input with +48V Phantom Power
• 3.5mm Headphone Output For Monitoring
• 15.7" Attached Cable with TRRS Mini Plug
• Numbered Gain Control & Headphone Level

• Compatible with iOS, Mac & PC
• 1 x 1/4" Instrument / Line-Level Input
• 1 x 1/4" Output for Use with Amplifiers
• Dual-Mode Switch for Output: FX & THROUGH
• 1 x 3.5mm Headphone Output

• 1-In / 3-Out Compact Audio Interface
• Adjustable Input Impedance with Z-TONE
• PURE Class-A Mic Preamp with JFET Stage
• Active or Passive Pickup Selection
• Amp Out with Ground Loop Interrupter
• MIDI I/O, Footswitch/Expression I/O

• Stereo line input over RCA connectors.
• Audio level LED indicators to dial in the right gain fast.
• Up to 48kHz / 24bit resolution for crystal clear sound.
• Pre-mixes audio sources down to stereo or mono.
• Loop-back mixes incoming signals with your device’s audio.

• Two 3/4" Tweeters (One per Monitor)
• Two 3" Woofers (One per Monitor)
• Bluetooth Capability
• Two RCA Inputs
• One 3.5mm Input

• For iOS, Android, Mac, PC
• Studio-Quality Class-A Microphone Preamp
• 24-Bit / 96 kHz
• Adjustable Input Gain
• Headphone Monitor Pre- or Post-Device

• Portable Guitar/Bass Audio Interface
• Bus Powered / Mac, Windows, iOS, Android
• 1/4" Hi-Z Guitar In
• 1/4" Amp Out / 3.5mm Headphones Out
• 24-Bit / 48 kHz AD/DA Conversion
• AmpliTube and TONEX Amp-Modelling Apps

• Sized for iLoud Micro Monitors
• Zippered Pouch for Accessories
• Adjustable Shoulder Straps

• Nickel-plated plugs for rugged durability and efficient signal transfer
• Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
• OFC spiral shields for effective EMI and RFI rejection and flexibility

• Pristine Audio Fidelity
• Ground Lift Switch
• Voltage Gain Selector

• Selectable Active/Passive Pickup Input.
• Z-Tone Variable Impedance.
• Switchable Pure/JFET Channel Tone.
• Switchable -20 dB Pad.
• 1/4" Thru and Main Outputs.

• Front-Panel 1/4" Hi-Z In and Amp Out.
• XLR-1/4" Combo Mic/Line Input.
• 2 x 1/4" Balanced Line Outputs.
• Class-A Preamp with 48V Phantom Power.
• Selectable Active/Passive Pickup Input.

• Single Channel
• Battery or Phantom Powered
• Ground Lift
• Input Pad
• Rugged Enclosure

• All-in-One Acoustic Room Correction
• Works with Any Interface and Computer
• Latency-Free, Set-and-Forget Correction
• Improves Frequency and Stereo Balance
• Avoids Drastic AEQ Changes to Room
• Work Faster and Create Better Mixes

Passive DI Box. Instrument/Line in switch. Ground lift switch to eliminate hum.

• Vloggers, Livestreamers, Musicians
• Lightning, USB Type-C & USB Type-A Cords
• XLR-1/4" Combo Mic / Instrument Preamp
• 3.5mm Headset Port and Stereo RCA Input
• Loopback for Live Streaming Host Output
• Up to 24-Bit / 96 kHz Resolution