Studio Monitors

• For Pro and Project Studios
• 2 x Combination 1/4" TRS/XLR Inputs
• 1 x Stereo 3.5mm Input
• 2 x XLR Outputs
• 1 x Stereo 3.5mm Output

• Sized for iLoud Micro Monitors
• Zippered Pouch for Accessories
• Adjustable Shoulder Straps

• For Monitors, Amplifiers, DJ Gear & More
• 9kg Weight Capacity per Puck
• Portable Solution for Decoupling Needs
• Provides Isolation and Decoupling
• Improves Focus & Reduces Image Smearing

• Analogue Stereo Volume Control
• Fits Any Active Speaker Setup
• Minimum of Clutter and Wires
• High-Precision Level Control
• No Power Required

• Connectivity
• Easy Operation
• Striking and Functional Design

• Two by Two Monitor Controller
• 2x Sources and 2x Monitor Pairs
• Classic Big Knob Volume Control
• Mono, Mute, and Dim Functions
• Pristine Audio Quality

• 5-inch Black Kevlar low frequency drivers; 1-inch natural silk dome tweeters
• New computer-optimised tweeter waveguide for precise imaging
• High-EQ and Low-EQ controls for dialing in the perfect sound
• Enhanced rear ports for extended low-frequency response

• 64W reference-class studio monitors
• Advanced Waveguide technology
• Ultra-high resolution 1" silk dome tweeters
• Long-throw 3.5" woofers
• Two stereo analog inputs
• Low and high frequency controls

• Compact Desktop Design
• Fits Under Most Computer Monitors
• Mackie Acoustic Design and Tuning
• Three Sound-Enhancing Presets
• Mute Control

• Monitor Controller for Stereo Speakers
• Stream Bluetooth to Wired Speakers
• Add Subwoofer to Stereo Setup
• Prominent Volume Dial
• Headphone Output for Private Monitoring

• 50 watts of clean, articulate stereo sound
• 3” polypropylene-coated woofer
• .75” ferrofluid-cooled silk-dome tweeter

• 5" Woven Composite Woofer.
• 1" Ultra-Low-Mass, Silk-Dome HF Driver.
• EBM Waveguide Designed by Hugh Sarvis.
• Large Ported Enclosure for Deeper Bass.
• 80W Class AB Biamplification.

• Compact Speakers for Content Creation.
• For Gaming, Monitoring, and More.
• Bluetooth 5.0 Streaming.
• 3.5" Woven Composite Woofer.
• 1" Silk-Dome Tweeter.

• 50 watts of clean, articulate stereo sound
• 3” polypropylene-coated woofer
• .75” ferrofluid-cooled silk-dome tweeter

• 64-Watt reference-class studio monitors
• Advanced Waveguide technology
• Ultra-high resolution 1" silk dome tweeters
• Long-throw 4.5" woofers
• Two stereo analog inputs
• Low and high frequency controls

• Connects to Computer over USB
• 2 Sets of Analogue Inputs
• 3 Sets of Switchable Speaker Outputs
• VCA-Powered Control with Large Knob
• 2 Headphone Outs with Independent Knobs

• 5-inch Black Kevlar low frequency drivers; 1-inch natural silk dome tweeters 

• New computer-optimised tweeter waveguide for precise imaging 

• High-EQ and Low-EQ controls for dialing in the perfect sound 

• Enhanced rear ports for extended low-frequency response 


• VCA Control and USB Audio Interface.
• Large Control Knob Sets Levels Faster.
• High-End VCA Technology.
• Controls 3 Pairs of Studio Monitors.
• 2 x Powerful Headphone Amplifiers.

• 4" Fibreglass Woofer
• 0.75" Soft Dome Tweeter
• 21W Class AB Amplifier
• Front-Mounted Diffusers
• Bass Reflex Ducts

• 50 watts of clean, articulate stereo sound
• 4” polypropylene-coated woofer
• .75” ferrofluid-cooled silk-dome tweeter

• For Studio Recording, Mixing, Mastering
• Acoustic Tuning Adjustment Controls
• 1" Silk Dome Tweeter for Treble
• 4.5" Kevlar Woofer Cone for Bass
• 25W Class AB Amplification

• 5.25" Woofer and 1" Silk-Dome Tweeter
• 48 Hz to 20 kHz Frequency Response
• 102 dB SPL
• EBM Waveguide for a Wide Sweet Spot
• Control Level, HPF, MF Trim, and HF Trim
• Acoustic Space Filter

• Gold coated connectors
• Full range sound
• High and low-level inputs
• 35-20KHz frequency response

• 50 watts of clean, articulate stereo sound
• 4” polypropylene-coated woofer
• .75” ferrofluid-cooled silk-dome tweeter

• Long-throw 6-3/4" Woofer.
• Built-in 75 & 35 Watt Power Amps.

• Bi-Amplified Powered Reference Monitor
• Dual 41W Class-D Amplifiers
• Low Frequency Woofer: 5"
• Neodymium Woven-Composite Tweeter: 1"

• 4" Fibreglass Woofer
• 0.75" Soft Dome Tweeter
• 21W Class AB Amplifier
• Front-Mounted Diffusers
• Bass Reflex Ducts

• Compact Speakers for Content Creation
• For Gaming, Monitoring, and More
• Bluetooth 5.0 Streaming
• 4.5" Woven Composite Woofer
• 1" Silk-Dome Tweeter

• Patented Image Control Waveguide
• Next-generation JBL transducers
• Patented Slip StreamT low-frequency port
• Dual integrated, custom Class-D amplifiers
• New Boundary EQ settings

• Gold coated connectors
• Full range sound
• High and low-level inputs
• 33-20KHz frequency response

• 80 watts of clean, articulate stereo sound
• 5” polypropylene-coated woofer
• .75” ferrofluid-cooled silk-dome tweeter

• EBM Waveguide Designed by Hugh Sarvis.
• 8" Woven Composite Woofer.
• 1.25" Silk-Dome HF Driver.
• Large Ported Enclosure for Deeper Bass.
• 140W Class AB Biamplification.

• 4" Fibreglass Woofer
• 0.75" Soft Dome Tweeter
• 21W Class AB Amplifier
• Front-Mounted Diffusers
• Bass Reflex Ducts

• Premium 200 Watt Bi-Amplified Nearfield Studio Reference Monitor
• Precise & Neutral Soundstage, Non-Fatiguing for Extended Listening
• 5" Dual Concentric Driver Ensures Unrivalled Articulation & Dynamics
• 0.75" Titanium Tweeter with Tulip Waveguide

• 50Hz – 20kHz Frequency Response
• 0° Phase Response
• 75W + 25W Class-D Amplifiers
• 5” Composite Fiberglass Woofer
• 1” ferrofluid cooled Soft Dome tweeter
• RCF Precision Waveguide

• 70W Total Output
• 127 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• 300W 2-Way Powered Speaker.
• 10" Long-Excursion Low-Frequency Driver.
• 1.35'' High-Frequency Driver.
• Mic/Line Input.
• 2-Band AEQ.

• 3-D Imaging Waveguide
• Dual-Layer Voice Coil
• Low Noise Port Tube

• 3-D Imaging Waveguide
• Dual-Layer Voice Coil
• Low Noise Port Tube

• Sturdy, durable and Ported Low-Vibration Speaker Cabinets
• Overload Protection
• Balanced XLR and 1/4" TRS Input Connectors

• 2-way bass-reflex bi-amplified nearfield studio monitor
• 5" cone woofer and 1" dome tweeter
• 54Hz - 30kHz frequency response
• 45W LF plus 25W HF bi-amp system for total 70W power amplification
• ROOM CONTROL and HIGH TRIM response controls
• XLR and TRS phone jack inputs, balanced or unbalanced

• Stereo active speaker system
• 2-way 5 ¼" speaker system
• Recessed mounting bracket
• Remote wall panel input connection
• Standby energy saving mode
• Vertical and horizontal mounting

• 8" Long-Throw Kevlar Woofer.
• 1" Dome Tweeter.
• Class A/B Amplifiers.
• Active Protection Circuitry.
• XLR, 1/4", and RCA Inputs.

• 8" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 105 dB SPL
• EBM Waveguide for a Wide Sweet Spot
• Control Level, HPF, MF Trim, and HF Trim
• Acoustic Space Filter

• For KH 310 studio monitor
• Protects the drivers

5" Kevlar Woofer, 1" Silk Dome Tweeter, 100W Bi-Amped Power, 52 Hz to 35 kHz Frequency Response, Class A/B Amplifiers, Custom Waveguide

• 5.3" Woofer & 1" Tweeter
• Bi-Amped Class-D Design
• 50 Hz to 20 kHz Frequency Response
• 100 dB SPL
• Proprietary Waveguide Technology

• 3 x Sources and 2 x Monitor Pairs
• Classic Big Knob Volume Control
• Independent Trim on All Sources
• Mono, Mute, and Dim Functions
• 2x2 USB Recording Interface

• CR3-X 3" Multimedia Monitors
• EM-USB USB Condenser Microphone
• MC-100 Headphones
• Includes Connection Cables & Desk Stand
• 3" Polypropylene Coated Woofer

• Loaded with the same transparent audio circuitry as Drawmer's high-end offerings
• Streamlined design is tailor-made for smaller project studios
• Accommodates two sets of studio monitors and a subwoofer
• Built-in headphone amplifier with dedicated level control
• 3 inputs including 2 TRS jacks and a 1/8" auxiliary jack

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• For Music Production and Video Editing
• 0.75" Dome Tweeter and 3.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• Premium 300 Watt Bi-Amplified Nearfield Studio Reference Monitor
• Precise & Neutral Soundstage, Non-Fatiguing for Extended Listening
• 6.5" Dual Concentric Driver Ensures Unrivalled Articulation & Dynamics
• 1" Titanium Tweeter with Tulip Waveguide

• 95W Total Output
• 165 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• Enables the Connection of Multiple Subwoofers to a Single Remote Controller

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• For Music Production and Video Editing
• 1" Dome Tweeter and 4.5" Cone Woofer
• 26W Output Power per Speaker
• 3-Way 500 Hz Room Control Switch
• 3-Way 2 kHz HF Trim Switch
• Wide Frequency Response

• 45Hz – 20kHz Frequency Response
• 0° Phase Response
• 100W + 40W Class-D Amplifiers
• 8” Composite Fiberglass Woofer
• 1” ferrofluid cooled Soft Dome tweeter
• RCF Precision Waveguide

• 2x 3/4" Tweeters
• 2x 3" Woofers
• Bluetooth Capability
• 2x RCA Inputs
• 1x 3.5mm Input

• All-in-One Acoustic Room Correction
• Works with Any Interface and Computer
• Latency-Free, Set-and-Forget Correction
• Improves Frequency and Stereo Balance
• Avoids Drastic AEQ Changes to Room
• Work Faster and Create Better Mixes

• For Content Creators and Pro Mixers
• For Stereo or Immersive Mixing Formats
• Main Speaker Powers Satellite
• Bluetooth 5.1 for Audio Streaming
• 1/4" TRS and RCA Inputs
• 4.5" Woofer and 1" Soft-Dome Tweeter

• 8" Composite Woofer
• 200W Class AB Amplifier
• 50 to 130 Hz Continuously Variable LPF
• Polarity Invert Switch
• Input Gain

• 95W Total Output.
• 165 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• A Simple Hardware Remote Used to Control the Subwoofer System Volume, LFE Gain, and Bass Management

• 180-Watt Bridge-Mode Amplifier
• Long-Throw 10" Woofer
• Advanced Waveguide
• XLR and RCA Input Connectors
• Low-Pass Filter for Crossover Alignment

• 5.25" Kevlar Woofer
• 1" Dome Tweeter
• Class A/B Amplifiers
• XLR, RCA, and 1/4" Inputs
• Precision Crossover Network

• Bi-Amplified Powered Reference Monitor
• Dual 41W Class-D Amplifiers
• Low-Frequency Woofer: 5"
• Neodymium Woven-Composite Tweeter: 1"

• 2 x 3.5" Polypropylene Mid-Woofers.
• 1 x Back-Chamber Silk Dome Tweeter.
• Class-D, Bi-Amped, 100W RMS.
• DSP Tuned Bass Reflex.
• Frequency Response: 40 Hz to 24 kHz.

• Premium 300 Watt Bi-Amplified Nearfield Studio Reference Monitor
• Precise & Neutral Soundstage, Non-Fatiguing for Extended Listening
• 8" Dual Concentric Driver Ensures Unrivalled Articulation & Dynamics
• 1" Titanium Tweeter with Tulip Waveguide

• 120W Total Output.
• 203 mm Cone Woofer.
• 25 mm Dome Tweeter.
• Room Control Response Switch.
• High Trim.

• 120W Total Output
• 203 mm Cone Woofer
• 25 mm Dome Tweeter
• Room Control Response Switch
• High Trim

• 6.5" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 103 dB SPL
• Single Point-Source Coaxial Design
• Wide Sweet Spot, Precise Phase Alignment
• Control Level, HPF, MF Trim, and HF Trim

• 160 watts of clean, articulate stereo sound
• 20 polypropylene-coated woofer
• 190cm ferrofluid-cooled silk-dome tweeter
• Specially designed waveguide delivers unmatched clarity and sound dispersion at all listening levels
• Custom-tuned rear ports for smooth, even bass extension
• All-wood cabinet provides a natural sonic character superior to low-grade plastic designs

• 5.25"(13.3 cm) Woofer
• 0.75"(1.9 cm) Dome Tweeter
• 35 W/Channel Amplifier
• XLR, 1/4", and RCA Inputs
• Stereo Headphone Jack

• Long-throw 6-3/4" Woofer.
• Built-in 75 & 35 Watt Power Amps.

• Room Response Compensation
• Active Crossovers
• SPL: 96 dB
• Frequency Response: 67 Hz - 25 kHz (-6 dB)

• Custom 6.8" 2 Air Motion Transformer tweeter
• Unfolded AMT tweeter diaphragm
• 8" custom-coated, woven Kevlar, low-frequency driver
• Balanced XLR, 1/4" TRS, and unbalanced RCA inputs

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 5" Woofer
• 1" Soft Dome Tweeter
• Bi-Amped Class-D Amplifier: 2 x 50W
• Frequency Response: 50 Hz to 21 kHz
• 24-Bit / 96 kHz Signal Path and DSP
• Sensitivity: 3 Settings

• 4x Sources and 3x Monitor Pairs
• Classic Big Knob Volume Control
• Independent Trim on All Sources
• Mono, Mute, and Dim Functions
• 2x4 USB Recording Interface

• 74 to 20,000 Hz Frequency Response
• 3/4" Metal Dome Tweeter for Treble
• 76.2 mm Woofer for Bass
• Bass Tilt Control
• Aluminium Minimum Diffraction Enclosure

• RJ45 Dante Input
• Dante Input Switch: Input 1, 2, or 1+2
• Compact Design
• 4" Full Range Driver
• 20W D-Class Amplifier

• 8" Woofer & 1" Horn-Loaded Tweeter
• Coaxial Transducer with Coherence Align
• 200W RMS with Class D Amplification
• 102 dB Max SPL
• 32-bit/96kHz Active Floating-Point DSP

• Patented Image Control Waveguide
• Next-generation JBL transducers
• Patented Slip StreamT low-frequency port
• Dual integrated, custom Class-D amplifiers
• New Boundary EQ settings

• 8" Woofer and 1.25" Silk-Dome Tweeter
• 35 Hz to 20 kHz Frequency Response
• 105 dB SPL
• Single Point-Source Coaxial Design
• Wide Sweet Spot, Precise Phase Alignment
• Control Level, HPF, MF Trim, and HF Trim

• A Kit to Locate the Electronics Panel

• 130 mm Composite Sandwich Woofer Cone
• 25 mm Titanium Dome Tweeter
• 160 W Peak Analogue AB Amplifier
• Elliptical Modelled Dispersion Waveguide
• Wide Horizontal Dispersion