Mounting Hardware
Impact 5/8" Snap-in Pin for Super Clamps (Black)
Used to connect a lighting fixture to a Super Clamp
In stock
Ships Monday
$16.95
You Pay:
$12.95
$16.95
iFootage Spider Crab Vehicle Suction Cup VS-146
- For Use with Spider Crab Vehicle Mount
- Create Smooth Motion Shots on Vehicles
- 1/4"-20 & 3/8"-16 Screws/Thread Mounts
- 30 kg Maximum Payload
In stock
Ships Monday
$236.00
You Pay:
$179.00
$236.00
Ulanzi R094 Super Clamp with 6.6cm Ball Head Arm
- Mounts on Surfaces 1.3 to 6.1cm Wide
- 6.6cm Ball Head Arm, 1.5kg Load Capacity
- 360° Mini Ball Head on Both Ends
- 1/4"-20 & 3/8"-16 Mounting Studs
- Nonslip Clamp Pads
- Wing-nut Fasteners
In stock
Ships Monday
You Pay:
$30.95
$129.00
You Pay:
$94.00
$129.00
SmallRig 2058 Super Clamp with 1/4" and 3/8" Thread (2pcs Pack)
Can be mounted onto anything like cameras, lights, umbrellas, hooks, shelves, Lightweight and durable, Equipped with 1/4’’ and 3/8’’ threaded holes
In stock
Ships Monday
You Pay:
$19.95
BIGSOFTI Universal Clip Accessory Mount for BIGSOFTI ONE
- Lightweight Mount
- Cold Shoe Mounting Foot with 1/4"-20
In stock
Ships Monday
$27.95
You Pay:
$20.95
$27.95
Impact Super Clamp with Ratchet Handle
Versatile grip tool made of lightweight cast alloy
In stock
Ships Monday
You Pay:
$62.95
SmallRig 735 Super Clamp w/ 1/4" and 3/8" Thread
Mount onto cameras, lights, umbrellas and more
In stock
Ships Monday
You Pay:
$14.95
Manfrotto 035 Super Clamp without Stud
- Lightweight cast alloy
- Holds just about anything
- Mount on any tube 13 - 55 mm
- Jaw Opening of 1.3 - 5.3 cm
- Stud not included
In stock
Ships Monday
You Pay:
$80.95
Avenger C339 Grab Clamp
Zinc Steel Construction, 12.5 mm Hole, Load Capacity: 330 lb
In stock
Ships Monday
$359.00
You Pay:
$188.00
$359.00
Fluotec Mounting Bracket with Stabilizer Arm for CineLight 120 Series
Available to order from Rubber Monkey Today.
In stock
Ships Monday
$519.00
You Pay:
$90.00
$519.00
Manfrotto 035C Super Clamp without Stud (Ratchet version)
- Securely mounted on any tube from 13 to 45 mm
- Equipped with ratchet handle
- Universal 1/4'' thread attachment
- Attachment is 5/8'' hexagonal socket
In stock
Ships Monday
You Pay:
$86.95
SmallRig 2220 Super Clamp
The jaw is fitted with rubber pads on the inside removing the wear and tear of the rod it clamps on. The clamp can open 10 to 55 mm.
In stock
Ships Monday
You Pay:
$47.95
Kupo KCP-600 Super Viser Clamp (End Jaw, 10cm)
- Steel and Aluminium Construction
- 30kg Load Capacity
- Hex Receiver and 5/8" Knurled Pin
In stock
Ships Monday
You Pay:
$81.95
SmallRig 828 Double Head Stud with 1/4" to 1/4" thread
Available to order today
In stock
Ships Monday
You Pay:
$7.95
You Pay:
$6.95
SmallRig Crab-Shaped Clamp
- Mounts on Surface 1.2 to 6.6cm Wide
- 1/4"-20 & 3/8"-16 Mounting Threads
- 3.5kg Load Capacity, Rubber Padding
- Large Thumb-Lever Fastener
- Aluminium & Stainless Steel Construction
In stock
Ships Monday
You Pay:
$32.95
Impact SRP-113 Long Double Stud 5/8"
Ideal for use with super clamp or other grip and mounting accessories
In stock
Ships Monday
You Pay:
$17.95
Manfrotto 037 Reversible Short Stud, with 3/8" & 1/4"-20 Threads (Brass)
- For Super Clamp System
- Replaces #2907
In stock
Ships Monday
You Pay:
$18.95
Tether Tools Rock Solid "A" Clamp (2", Black)
- Ideal clamp pressure for light clamping and speedy application and removal.
- Jaw opening: 2″ (5cm).
- Nickel plated steel jaws.
- Heavy-duty tempered steel springs.
- Polyvinyl handles and tips.
- Point-of-pressure remains near jaw.
- Clamping Strength = 10KG / 22.7lbs.
In stock
Ships Monday
You Pay:
$19.95
Impact CA-111 5/8" Male to 1/4"-20 Male Screw Adapter
Allows you to mount an accessory onto a 5/8" female stand
In stock
Ships Monday
You Pay:
$12.95
Nanlite PavoTube II 6C Coupler
- 1/4 20" Male to Male Adapter
- Mount Multiple PavoTube II 6C's Together
In stock with supplier
Usually ships in 2 - 3 working days
$9.95
You Pay:
$8.00
$9.95
You Pay:
$33.95
Manfrotto 013 Adapter Spigot
A double ended spigot with 1/4 inch and 3/8 inch male threads.
In stock
Ships Monday
You Pay:
$27.95
Manfrotto 088 Thread Adapter
Converts a female 1/4 inch screw to a male 3/8 inch thread.
In stock
Ships Monday
You Pay:
$13.95
K&M 216 Thread Adapter 5/8" 27 Gauge Female Thread to 3/8" Male Thread
For Microphone Mounts and Stands
In stock
Ships Monday
You Pay:
$12.95
9.SOLUTIONS Savior Clamp
- Load Capacity: 30 kg
- Weighs 0.44 kg
- 60 mm Jaw Opening
- Accommodate odd shapes
In stock
Ships Monday
You Pay:
$99.95
9.SOLUTIONS Savior Clamp with 5/8" Stud
- Load Capacity: 29.9 kg
- Weighs 0.45 kg
- 5.9 cm Jaw Opening
In stock
Ships Monday
You Pay:
$109.00
Manfrotto 148KN Reducing Bushing Set
Convert a 3/8 inch screw and a 1/4 inch female thread - 5 set
In stock
Ships Monday
You Pay:
$15.95
Manfrotto 026 Swivel Adapter
An adapter with the ability to rotate - supports up to 2.5kg
In stock
Ships Monday
You Pay:
$89.99
Kupo KS-060 5/8"(16mm) Receiver with 1/4"-20 Thread
- Allows Stand Mounting
- Spring-Loaded Locking Knob
In stock
Ships Monday
You Pay:
$16.95
Impact CA-102 Rapid Baby to 3/8" Male Threaded Adapter
For mounting of a light fixture, flash, or camera
In stock
Ships Monday
You Pay:
$27.95
SmallRig 4249 Super Clamp with ARRI Rosette Mount
- 14mm-55mm clamping range
- Features built-in 1/4"-20 threaded hole
- Made of aircraft-grade aluminium alloy
- Increased sturdiness and durability
In stock
Ships Monday
You Pay:
$56.95
9.SOLUTIONS Python Clamp with 5/8" Pin
- Load Capacity: 20 kg
- Clamping Range: 0 to 50 mm
- Tightening Knob
- 5/8" Pin
- 3/8"-16 (M10) Connection
In stock
Ships Monday
You Pay:
$76.95
Impact Female 1/4"-20 to Male 3/8" Thread Adapter
Brass female to male thread adapter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$11.95
Avenger D520LB 40" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$169.00
Manfrotto 045 Background Triple Hooks
A set of two background paper holders for three Expan 046.
In stock
Ships in 1 - 2 working days
You Pay:
$129.00
Kupo KS-076 5/8" (16mm) Stud with 1/4"-20 Female
- Converts 1/4"-20 Stud to 5/8" Baby Stud
In stock
Ships Monday
You Pay:
$8.95
Kupo KS-048 Junior 3"(7.62cm) Wall Plate, Junior 1-1/8" Receiver
- Eight Anchor Points
- Metal Locking Knob
- Chrome-Plated Steel Finish
In stock
Ships Monday
You Pay:
$39.95
Impact Super Clamp with 5/8" Snap-In Pin
- Load Capacity: 15kg
- Brass Pin with 1/4"-20 Male Threads
- Black Aluminium 5/8" Hex Pin
- Jaw Range: 1.27 to 5.3cm
In stock
Ships Monday
You Pay:
$71.95
Kupo KS-017 Universal 5/8" Stud, 3/8"-16 M & 1/4"-20 M Threads
- Double-Sided Stud
- Fits into Any 5/8" Receiver
In stock
Ships Monday
You Pay:
$10.95
Impact Grip Head for Lights and Accessories - 2.5" Diameter (Black)
Mounts Lights / Accessories on C-Stands
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$78.95
Impact CA-106 Junior to Baby Pin Adapter
1 1/8" (28 mm) and 5/8" (16 mm) spigots
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$47.95
Impact Rapid Baby to 1/4"-20 Male Threaded Adapter
For mounting of a light fixture, flash, or camera
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$24.95
9.SOLUTIONS Baby Pin Set
Increase mounting utility to anything with a 3/8" thread
In stock
Ships Monday
You Pay:
$52.95
Impact 1/4"-20 To 1/4"-20 Adapter Spigot
Male 1/4"-20 to male 1/4"-20 adapter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$14.95
Kupo 838 Handcuff Clamp with T Handle (Silver)
- High Tensile 6061 Aluminium Extrusion
- SWL: 440lbs / 200kg
- TUV Approval
- Rig Heavy Luminaries Quickly & Effortlessly
In stock
Ships Monday
You Pay:
$49.95
Titan Heavy Duty Metal Clamp (Grey)
- 4cm maximum clamping range
- Perfect for hanging backgrounds
- Metal construction
In stock
Ships Monday
You Pay:
$6.95
Uniden RDA71 Window Mount 1 Cup Bracket R3NZ / R7NZ
- Replacement windshield suction cup
- Extra mounting bracket
- Suction cup mount designed for the R7 radar detector
In stock
Ships Monday
You Pay:
$67.95
Impact Scissor Mount for Drop Ceilings
Enables attachment of small lights and accessories to the grid
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$30.95
Impact 3/8" and 1/4"-20 Adapter Spigot
Convert an accessory with a female thread to a male thread
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$17.95
Impact Baby Triple Header
- Five Welded Steel Baby Pins
- 5/8" Receiver
- Chrome-Plated Steel Construction
- Multiple Mounting Options
- Combo 1-1/8" Pin / 5/8" Receiver
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Kupo KCP-241 40" Hex Grip Arm with Big Handle (Silver)
- Baby Hex Pin Connection
- Non-Slip Surface
Usually ships in 8 - 12 weeks
$93.00
You Pay:
$67.95
$93.00
Impact Double Ended Spigot with 1/4"-20 and 3/8" Male Threads
Features both 1/4"-20 and 3/8" male thread sizes
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$25.95
Impact Small 3/8" Female Threaded Adapter to 1/4"-20 Male Threaded Post
Brass female to male thread adapter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$18.95
Manfrotto 175 Spring Clamp
A multi-purpose clamp that can grip 40mm to 5mm
In Stock
Usually ships in 2 - 3 working days
You Pay:
$52.95
Manfrotto 143BKT Camera Platform Bracket
A replacement camera platform for the magic arm.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$62.95
Impact Standard Stud for Super Clamp with 3/8" Male Threads
Used to mount cameras and other accessories onto the Super Clamp
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$13.95
Manfrotto 014-14 Rapid Adapter
Allows mounting of equipment with a 1/4 inch threaded receptor.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$33.95
Manfrotto 119 Adapter Spigot
Features a double female thread with a 1/4 inch and a 3/8 inch thread.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$13.95
Impact Pipe Clamp with Baby Pin
5/8" Pin, Aluminium Construction, 100 kg Load Capacity
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
Manfrotto 035RL Super Clamp with Standard Stud
- Replaces #2900
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
You Pay:
$5.95
Impact Hex Stud Grip Head with Super Clamp
- 2.5" Hex Stud Grip Head
- Super Clamp with Ratchet Handle
- Aluminium Alloy Construction
- Integrated Hex Stud
- 5/8, 3/8, 1/8, and 1/16" Holes
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Impact CC-106T Super Clamp with T-Handle
- Aluminium Alloy Construction
- 53mm Jaws
- Includes 5/8" Baby Stud
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$62.95
Impact CC-128 Double Super Clamp
- Aluminium Construction
- Grips up to 55mm Diameter Poles
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$139.00
9.SOLUTIONS Savior Clamp Mini
- Load Capacity: 30 kg
- Weighs 135 g
- 30 mm Jaw Opening
In stock
Ships Monday
You Pay:
$79.95
Manfrotto 147 Adapter Spigot 3/8" + 1/4"
A brass spigot with a 3/8 inch and a 1/4 inch screw.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$12.95
Matthews Monitor Mount for Baby (5/8") Spigot
- Compact Aluminium
- 29.5 kg Capacity
- Folds Flat to Your Monitor
- Maximum Tilt is ±45°
- Locking Pan & Tilt Handles
In stock
Ships Monday
You Pay:
$509.00
Impact 3" Baby Pin Wall Plate
- 5/8" Diameter Pin
- Chrome-Plated Steel Construction
- 8 Anchor Points
- Safety Cable Hole
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$40.95
Manfrotto 039 U-Hook Holders
A set of two U-hooks that are ideal for cross poles.
In stock
Ships Monday
You Pay:
$31.95
Leofoto SC-01 72mm Suction Cup Mount
- Mount Camera or Smartphone on Moving Vehicle
- 1 kg Suggested Load
- 25 kg Maximum Load
- 1/4" Screw
In stock
Ships direct Monday
You Pay:
$99.95
Avenger D400 4.5" Grip Head with Junior Pin
Aluminium Alloy Construction, 1 1/8" Junior Pin, 1 1/8" Receiver
In stock
Ships in 1 - 2 working days
You Pay:
$229.00
Manfrotto 118 Spigot with Double Male Thread
A 16mm spigot with double male thread 1/4 inch and 3/8 inch.
In Stock
Usually ships in 2 - 3 working days
You Pay:
$15.95
Impact Double Ball Joint Head
A handy accessory for mounting lights or other gear
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$81.95
Nanlite Pavotube Single T12 LED Tube Holder with 5/8" Receiver
- For Mounting Pavotube 15C and 30C
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$44.95
Leofoto SC-02 100mm Suction Cup Mount
- Mount Camera or Smartphone on Moving Vehicle
- 1.5 kg Suggested Load
- 40 kg Maximum Load
- 1/4" Screw
In stock
Ships direct Monday
You Pay:
$129.00
Avenger D500LB 20" Extension Arm (Black)
Zinc-plated Steel and Aluminum Alloy Construction
In stock
Ships in 1 - 2 working days
You Pay:
$159.00
Tether Tools Rock Solid Baby Ballhead Adapter
Aluminum Construction, 16mm Receiver, Barrel Fits in Junior 28 mm Receiver, Oversized Tightening Knob
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$88.95
Manfrotto 088LBP - Small Adapter
- Replaces #3367
- Reducing bushing
In Stock
Usually ships in 2 - 3 working days
You Pay:
$21.95
Tether Tools Rock Solid A Clamp (Black, 1")
- Has Many Photographic and Video Uses.
- Holds Different Materials Securely.
- Polyvinyl Handles and Tips.
- Jaw Opens 1" Wide.
- Clamp Holds up to 11.8 lb.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$18.95
Kondor Blue 5/8" Baby Pin Spigot Receiver to NATO Clamp Adapter (Raven Black)
- NATO Clamp
- Mounts on Light Stands and C-Stands
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Impact 6"/15cm Baby Pin Wall Plate
- 5/8" Diameter Pin
- Chrome-Plated Steel Construction
- 8 Anchor Points
- Safety Cable Hole
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$42.95
Tether Tools Rock Solid VESA Adapter Plate (400 x 200)
- For Use with Studio Vu Monitor Bracket.
- Load Capacity up to 80 lb.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
Impact Wall Plate with 5/8" Locking Receiver
- Accepts 5/8" Diameter Pin.
- Chrome-Plated Steel Construction.
- 8 Anchor Points.
- Hole for Safety Cable.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$59.95
Manfrotto 203 Extension Arm for Mini Clamp
- Requires Mini Clamp
- Extends 12 cm
- 1/4"-20 and a 3/8" screw thread
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$99.95
Tether Tools Rock Solid Master Clamp
Securely attaches to round and flat surfaces from 1.3 cm to 5.3 cm, Lift-ratch style handle for tightening in confined spaces
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$79.95
Manfrotto 133B Joining Arm for Super Clamps, Black - 6.5"
- Joins two super clamps
- Hexagonal ends
- Lock the clamps together at different angles
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$38.95
Nanlite PavoTube Transparent Polycarbonate Clip with 5/8" Baby Pin
- For PavoTube 2 and 4 ft RGBW LED Tubes
- Transparent yet Durable
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$16.95
Impact BHE-104 Camera Platform for Flex Arm
Supports lightweight cameras up to 1 lb on the Impact Flex Arm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$33.95
Kupo KCP-710B Convi Clamp With Adjustable Handle (Black Finish)
- Ratcheted Handle for Repositioning
- Accepts Select Convi Accessories
- Lightweight Alloy Construction
- Stainless Steel Bolts
- Supports up to 20kg
Usually ships in 8 - 12 weeks
You Pay:
$40.95
Manfrotto 066 Double Female Stud for Super Clamp
- Double ended stud
- 1.6 cm diameter stud
- Extend an existing threaded stud
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$21.95
Impact 5/8" Receiver to 5/8" Pin Adapter
- Aluminium Female to Male Adapter
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$36.95
Manfrotto 061 Joining Stud for Super Clamp
- Compatible with Super Clamps
- Steel
- Reliable
- 5 cm in height
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$21.95
Impact Short Double Female Stud for Super Clamps with 1/4"-20 & 3/8" Threads
Used with a Super Clamp or to extend an existing threaded stud
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$9.95
Impact 1/4"-20 Threaded 3/8" Stud for Stand Top
Allows portable background crossbar to be used with the stand
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$25.95
Impact Collapsible Reflector Holder
Holds 60" Round Collapsible Reflector, Light and Compact
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$44.95
Nanlite PavoTube Transparent Polycarbonate Clip with Two 1/4"-20 Receivers
- For PavoTube 2 and 4 ft RGBW LED Tubes
- Transparent yet Durable
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$5.95
Impact Heavy Duty Swivel Pin
Adds articulation to your stand or boom
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$94.95
Kupo KS-066 Baby Triple Header
- 5 Baby Pin Studs
- 1 Baby Receiver
- Mount Multiple Lights
- All-Steel Construction
Usually ships in 8 - 12 weeks
$76.00
You Pay:
$65.00
$76.00
Impact 5/8" Receptor to Long 3/8" Diameter Stud
Converts studs for fixtures that accept nothing larger than 3/8"
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$25.95
Kupo KSC-03 Pump Suction Cup with 3/8"-16 Thread (6")
- Rubber Material with Silicon
- Mounts to Smooth, Non-Porous Surfaces
- Use from 10.4 to 120 Degrees Fahrenheit
Usually ships in 8 - 12 weeks
$86.95
You Pay:
$65.00
$86.95
Matthews Infinity Arm Anti-Rotation Tip
- 3/8” threaded pin mount with indexing pins
- Precision machined ball mount pairs with Infinity Arm
- Black anodize coating
Pre-Order
ETA to be confirmed
Full Price:
$159.00
Deposit:
$15.00
Kupo KCP-215 Grip Arm Support
- Lightweight Telescopic Arm
- Aluminium & Steel
Usually ships in 8 - 12 weeks
$79.95
You Pay:
$78.95
$79.95
You Pay:
$14.95
Matthews Super Mafer Clamp
- Protective Pads in Jaws for Better Grip
- Accepts Snap-In & Standard Baby Pins
- Strengthened to Withstand Great Clamping Pressure
Usually ships in 4 - 6 weeks
You Pay:
$119.00
Impact Short Double Male Stud for Super Clamps with 1/4"-20 & 3/8" Threads
Can be used with Super Clamps, Varipoles, light stands, boompoles etc.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$12.95
Manfrotto 036-14 Lighting Stud
Features a 1/4 inch screw - ideal when mounting cameras directly
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$26.95
9.SOLUTIONS Python Clamp with Snap-In Socket
- Load Capacity: 20 kg
- Clamping Range: 0 to 50 mm
- Tightening Knob
- 5/8" Receiver
- 3/8"-16 (M10) Connection
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
Ulanzi Upgraded Claw Backpack Clamp with Quick Release
- Attaches Claw QR Set to Strap or Belt
- Claw-Locking Quick Release System
- Load Capacity: 2.5kg
- Clamp Capacity: 58mm-15mm
- T-Type Cyclone Lock
Usually ships in 4 - 6 weeks
You Pay:
$73.95
Impact Standard Stud for Super Clamp with 1/4"-20 Male Threads
Mounts cameras and other accessories directly onto the Super Clamp
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$13.95
Manfrotto 171 Mini Clamp
- Professional, compact standard mini clamp
- Designed from hard wearing aluminium alloy
- Versatile enough for studio or location work
- Comes with a standard 16 mm socket
- Can clamp on tubes up to 35 mm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$62.95
Impact 1/4"-20 Female to 3/8"-16 Male Adapter with 1 1/8" Flange
Mounts cameras or lighting fixtures onto a tripod or light stand
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$26.95
9.SOLUTIONS Python Double Clamp
- Load Capacity: 20 kg
- Jaws Open from 0 to 50 mm
- Two clamps
- Dual contoured jaws
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Godox Q Q-Type Multifunction Clip
- High quality material
- Several 1/ 4 and 3 / 8 bracket mounting holes
- Adjustable range from 3 to 45mm
- Quickly fix the clip by the screw
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$24.95
9.SOLUTIONS Python Clamp with Grip Joint
- Load Capacity: 20 kg
- Clamping Range: 0 to 50 mm
- Tightening Knob
- Grip Joint with 3/8" & 5/8" Receptacles
- 3/8"-16 (M10) Connection
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$89.95
Manfrotto 158 Female Converter Socket - 5/8" to 5/8" (16mm)
- Replaces #3101
- Converts to a 5/8" female socket
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$49.95
9.SOLUTIONS Barracuda Clamp
- Load Capacity: 20 kg
- Weighs 0.55 kg
- 60 mm Jaw Opening
- 5/8" Receiver
- Fits all Super Clamp Accessories
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
Manfrotto 123 Pivoting Boom Clamp for Super & Heavy Duty Boom
- Pivoting clamps
- For super/heavy duty booms
- Use with 35 mm diameter boom shafts
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$189.00
9.SOLUTIONS Savior Spring Clamp
- Load Capacity: 10 kg
- Weighs 320 g
- Wide jaws
- Strong torsion spring
- Support irregularly shaped objects
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$74.95
Phottix Multi Clamp
Attaches to any circular bar or pole.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$54.95
Impact Baby Drop Down Pin
Helps to maintain a constant downward angle of a mounted light fixture
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$84.95
Impact Large Clip Clamp with 5/8" Receptor and 3/8" Female Threads
- 5/8" Male Stud & 3/8" Female Socket
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$38.95
Tether Tools Rock Solid VESA Local Monitor Mount for Stands and Tripods
- For Small- to Medium-Sized Monitors.
- Supports 75x75 & 100x100mm VESA Patterns.
- Maximum Load Capacity of 35 lb.
- Aerospace Aluminium Alloy Construction.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$339.00
Manfrotto Column Clamp (349)
- Accepts 190 & 055 Series Columns
- Replaces #3424
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$219.00
Manfrotto 186 Female Threaded 3/8" to Male 5/8" Stud Adapter - 50mm Long
- 50 mm long
- 3/8'' on the lower end
- 5/8'' stud at the top
- 5 cm in height
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$36.95
Impact Female Convertor Socket
Converts a standard 16 mm stud to a socket
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$31.95
Phottix Multi Clamp with Mounting Arm
Mount a flash anywhere.
In Stock with Supplier
Usually ships in 2 - 3 working days
You Pay:
$79.95
Manfrotto 153 Mole Richardson Baby Adapter - 5/8-5/8"
- Replaces #3106
- Secure mounting of Mole Richardson Baby series fixture
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$49.95
9.SOLUTIONS Python Clamp Mini
- Load Capacity: 5 kg
- Jaws Open from 8 - 35 mm
- Position anywhere
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$58.95
Manfrotto 176 U-Hooks for Mini Clamp
- Set of 2 U-hooks
- Ideal for cross poles when used to support background paper
- Suitable for the Super Clamp
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$52.95
9.SOLUTIONS Savior Spring Clamp Mini
- Jaws Have Multiple Contact Points
- 2 x 1/4"-20 and 2 x 3/8"-16 Sockets
- Clamping Range: 0 to 45 mm
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$56.95
Impact Double Ball Joint Head with Super Clamp and Camera Platform Kit
3 piece kit to support cameras up to 2.3 kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$169.00
Impact Double Ball Joint Head with Camera Platform Kit
2 piece kit that supports cameras up to 2.3 kg
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Impact Joining Stud for 2 Super Clamps
Double hex head pin that joins 2 Super Clamps together
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$12.95
Tether Tools Rock Solid VESA Adapter Plate (200 x 200)
- For Use with Studio Vu Monitor Bracket.
- Up to 200 x 200 VESA Compliance.
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$84.95
Kondor Blue NATO Clamp to Ball Head for Magic Arms (Space Grey)
- Standard NATO Rail Clamp
- Fits Kondor & 3rd-Party 2.5cm Ball Arms
- 1/4"-20 & 3/8"-16 Mount Alternative
- Thumbscrew Fastener, Rubber O-Ring
- Aerospace-Grade Aluminium
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$75.00
Kondor Blue Cine Magic Arm Centre Clamp (Space Grey)
- Aluminium Construction
- Compatible with Two 1" Ball Heads
- Large Thumb Knob
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$109.00
Kondor Blue 5/8" Baby Pin Spigot Receiver to NATO Clamp Adapter (Space Gray)
- NATO Clamp
- Mounts on Light Stands and C-Stands
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$119.00
Godox TL30 LED Light Tube Retaining Clip
- For TL60 LED Tube Lights
In stock with supplier
Usually ships in 2 - 3 working days
You Pay:
$10.95
Avenger E200 Stand Adapter
Zinc-plated Steel Construction, Junior to Baby: 1 1/8" to 5/8"
In Stock
Usually ships in 2 - 3 working days
You Pay:
$82.95
Manfrotto 179 16mm Female Adapter with 3/8" Screw and 80mm Disc
- 5/8" (16mm) Stand Adapter
- 3/8" (9.5mm) Screw
- 3.2" (80mm) Disc, Wing Nut
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$99.95
Manfrotto 174 Snap-In Pin for Super Clamp System
- Metric 10 Screw
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$21.95
Manfrotto 061RA Right Angle Joining Stud for Super Clamp
- Joins two super clamps together
- Useful for making frames
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$21.95
Kondor Blue Cine Magic Arm Centre Clamp (Black)
- Aluminium Construction
- Compatible with Two 1" Ball Heads
- Large Thumb Knob
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$129.00
Elgato Heavy Clamp with Ball Head
- Jaw-Vise Clamp
- 1/4"-20 Thread Ball Head Mount
- Supports up to 3.5 lb
- Clamps to Edges & Poles
- 4 x 1/4"-20 Mounting Points
- Up to 2" Clamping Width
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$99.95
Manfrotto 375 Multiclip
- Versatile small and lightweight double clip
- Useful to hold reflector cards, gobo, gels in front of lights
- Total length is 11.4 cm
- Weighs 80 g
In Stock with Supplier
Usually ships in 1 - 2 weeks
You Pay:
$47.95
Kupo KCP-200B 2-1/2" Grip Head With Big Handle (Black Powder-Coated Finish)
- Aluminium & Steel
- Four V-Shaped Jaws
- Handle With Roller Bearings
- Non-Slip Aluminium Friction Disc
Usually ships in 8 - 12 weeks
You Pay:
$46.95
Matthews Matthellini Clamp (2" End Jaw, Silver)
Provides strong, solid gripping
Usually ships in 6 - 8 weeks
You Pay:
$189.00
Matthews Matthellini Clamp (3" Center Jaw, Silver)
Provides strong, solid gripping of round, square or rectangular tubing and many other common and irregular shapes.
Usually ships in 6 - 8 weeks
You Pay:
$149.00