Matthews
Filters
Back to results
SORT BY
ITEMS PER PAGE
Categories
Narrow Results
STOCK
FILTER
PRICE
FILTER RESULTS
Matthews Track Wedge
Available to Order From Rubber Monkey Today
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$13.95
Matthews Snap In Pin - 5/8"
- For Mounting Light Fixtures to a Mafer Clamp
- Standard 5/8" Stud
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$27.95
Matthews Baby Pin - 5/8" with 3/8" Threaded Tip
- For Use with Lightweight Telescoping Hangers
- Usable with a Variety of Grip Equipment
- Male Threaded Tip
- Screws into Female 3/8" Hole
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$30.95
Matthews MICROgrip Rod (8")
- MICROgrip Tabletop System
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$34.95
Matthews Rag Bag (Small, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$48.95
Matthews Rag Bag (Medium, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$52.95
Matthews Pin with Collar - 6"
- Small and Easy to Store
- Mount in a Grip Head
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$61.95
Matthews Putty Knife with 5/8" Pin
Available to Order From Rubber Monkey Today
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$83.95
Matthews Gobo Plate XL
- Two T-slots with V centering quickly secure grip head mounting
- 4 x ½” diameter holes for pear-snap placement prevent 4.5" grip head removal when loose, allowing plate to be safely captured when rigged
- 12 x 3/8” bolt holes and 20 each screw or nail holes secure the plate to set walls and lumber
- One 5/8” hole in the center of the plate to receive baby pins, 5/8” rods and mount half grid clamps
- Six evenly spaced markers on the edges allow for placement at a 45-degree angle without needing to measure it out
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$94.95
Matthews Rag Bag (Large, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$109.00
Matthews Junior Boa Weight Bag (4.5kg, Black)
Cordura nylon shell, with two wings
In stock
Ships Monday
$149.00
You Pay:
$114.00
$149.00
Matthews Super Mafer Clamp
- Protective Pads in Jaws for Better Grip
- Accepts Snap-In & Standard Baby Pins
- Strengthened to Withstand Great Clamping Pressure
Usually ships in 4 - 6 weeks
what does this mean?
You Pay:
$119.00
Matthews Rag Bag (Extra-Large, Red)
- For Storing Butterfly and Overhead Rags
- Keeps Material Dry and Clean
- Double Drawstring Closure
- Nylon Pack Cloth Construction
- Outer Pocket for Content Identification
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews LB2 Location Baby Bracket
- 5/8" Knurled Baby Pin With Safety Hole
- 4x 1" Strap Pass Throughs
- Two 1/4" Mounting Holes
- Four Nail / Screw Holes
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews MICROgrip Head
- Diameter is Only 1.25" (32mm)
- All the Features of a 2 1/2" Griphead.
- Ideal for Tabletop and Miniature Work.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews Hollywood Grip Head 2 1/2" (Black)
- 2 1/2" grip head.
- Large knobs.
- Non-slip.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews Hollywood Grip Head 2 1/2"
- 2 1/2" grip head
- Large knobs
- Non-slip
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews Boa Bag (1.1kg, Black)
- Stabilises Stands, Columns, Booms, etc.
- 2 Sections
- Nylon Construction with Steel Shot
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews Apple Box Eighth (50.8x30.5x2.54cm)
Smooth natural finish
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$119.00
Matthews Super Mafer Clamp with 5/8" Pin - Black
- A Baby (5/8" diameter) snap-in pin is included for mounting light fixtures.
- Snap-in pins have a hexagonal end that locks into place in the Mafer Clamp.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$129.00
Matthews Super Mafer Clamp with Baby 5/8" Pin
- Strengthened to withstand greater clamping pressure
- Protective pads in the jaws have been reformulated for better gripping action
- Comes with a snap-in pin
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$129.00
Matthews Baby Pipe Clamp with 5/8" Pin
- 5/8" pin for mounting
- Safety chain and pin
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$139.00
Matthews 200mm Adapter Plate for Monitor Mount
- Steel Construction
- Weight 0.7 kg
- Converts 100m VESA Monitor Mount to 200 mm
- Allows Use with Larger LCD and Plasma Displays
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$139.00
Matthews 149064 Open End Scrim - 24x36" - Black Double Scrim
- Black Double Scrim Fabric
- Control or Manipulate Light
- Soften or Reduce Light without Noticeable Edge
- Red Webbing Colour
- Flame Retardant
In stock
Ships Monday
$529.00
You Pay:
$149.00
$529.00
Matthews Mini Matthellini
- 3/8"-16 Male Thread
- End Jaw Design
- Jam Nut to Prevent Rotation
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$149.00
Matthews Matthellini Clamp (6" End Jaw, Silver)
- 5/8" Pin
- Steel Construction
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$149.00
Matthews Matthellini Clamp (3" Center Jaw, Silver)
Provides strong, solid gripping of round, square or rectangular tubing and many other common and irregular shapes.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$149.00
Matthews Baby Boa Weight Bag (2.2kg, Black)
Weighs 2.2kg, Cordura nylon shell, with 2 wings
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$149.00
Matthews Infinity Arm Anti-Rotation Tip
- 3/8” threaded pin mount with indexing pins
- Precision machined ball mount pairs with Infinity Arm
- Black anodize coating
Pre-Order
ETA to be confirmed
what does this mean?
Full Price:
$159.00
Deposit:
$15.00
Matthews Apple Box Quarter (50.8x30.5x5cm)
Smooth natural finish, Rounded-edge cut-outs for easy handling
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$159.00
Matthews Apple Box Half (50.8x30.5x10.2cm)
Smooth natural finish, Rounded-edge cut-outs for easy handling
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$169.00
Matthews Apple Box Full (51 x 30.5 x 20.3 cm)
Smooth natural finish, Rounded cut-outs for easy placement
In stock
Ships Monday
You Pay:
$189.00
Matthews Open End Scrim - 18x24" (White Artificial Silk)
Open End Frames made of spring steel with a 3/8" pin and support
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$189.00
Matthews Matthellini Clamp (2" End Jaw, Silver)
Provides strong, solid gripping
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$189.00
Matthews 149052 Open End Scrim - 12x18" - Black Single Scrim
- Reduces Light Intensity
- Spring Steel
- Open End Frames
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$199.00
Matthews Big Ben Clamp
A cheeseboro clamp with a 1-1/8" pin attached.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$199.00
Matthews MQ Mount for LED and Fluorescent Light Tubes
- For T-12 LED & Fluorescent Tubes
- Anti-Crush Jaws
- Compatible with all Grip Heads
- 1/4"-20-Tapped 3/8" Pin
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$209.00
Matthews Junior Pipe Clamp
- Forged steel
- Safety chain and pin
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$219.00
Matthews The Claw Rigging Clamp for Tube Lights
- Textured rubber to grip without surface damage.
- Lightweight with black finish
- Low-profile 5/8” pin mounts
- Magnets keep claw fingers open when mounting
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$219.00
Matthews 149058 Open End Scrim - 12x18" - Black Double Scrim
- Black Double Scrim Fabric
- Control & Manipulate Light
- Soften or Reduce Light without Noticeable Edge
- Flame Retardant
- Red Webbing Colour
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$229.00
Matthews MERF Mini Extendable Reverse Stand
- Small, Robust Light Stand.
- Maximum Height: 2.2m
- Folded Length: 0.5m
- Load Capacity: 4kgs
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$229.00
Matthews 169059 18x24" Flag
- Better Light Control
- Protect Camera Lens from Flares
- Rectangular
- Solid Black Fabric
- Position over Set Wall or Use 2+ to Create Box
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$239.00
Matthews 24x36" Flag
- Protects Camera Lens from Flares
- Control Spill Light
- Keep Light from Reaching an Area
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$249.00
Matthews Hollywood Head and Arm 40"
- Made of Stainless Steel
- T-Handles are ergonomically designed
- Comes with a Hollywood Grip Head attached to one end
- Strongest Grip Head in the business
- Additional Grip Head for positioning
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$249.00
Matthews Reverse Stand 7' (2.1m)
Best suited for location work, it can fold back on itself into a very compact package only 22.75" (58 cm) long.
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$249.00
Matthews Open End Scrim White Artificial Silk 24x36"
- Open-Ended
- Made of spring steel
- Designed with a 3/8" pin
- Used to control or manipulate light
Usually ships in 6 - 8 weeks
what does this mean?
You Pay:
$259.00