Recording

• Passive re-amping device
• Allows for playing prerecorded tracks through amplifiers and pedals and re-record the results
• Level control for fine tuning the gain
• Ground lift switch, when activated helps to reduce hum and buzz caused by ground loops

• For Keyboards
• 2 x 1/4" Inputs with Thru Outputs
• -15 dB Pad for Active Instruments
• Handles Huge Transients without Chocking

• For Stage & Home Recording Studio Use
• Handles High-Output Instruments
• Transformer Isolated, No Ground Loops

• Eliminates Hum & Buzz from Ground Loops
• Zero Phase & Harmonic Distortion
• Jensen Transformer Equipped

• Stereo Version of J48
• Low Distortion
• -15 dB Pad
• High-Pass Filter at 80 Hz
• Retains Instrument's Tone
• 14-Gauge Steel Construction

• Connect a Computer to a PA or Mixer
• Built-In 24-Bit / 96 kHz Convertor
• 2 x Balanced XLR 3-Pin Outputs
• 3.5mm Stereo Headphone Output
• USB Type-B Input
• Operates on USB Bus Power

• For Multimedia Applications
• Mono 1/4", Stereo RCA, and 3.5mm Inputs
• Mono XLR Line-Level Input
• Mic-Level Mono Sum at XLR Out
• -15 dB Pad

• No Batteries Required
• Merge Switch Sums Stereo Instruments
• Low Cut/Polarity/Pad/Ground Switches

• Increased Dynamic Range and Headroom
• 48V Phantom Powered & Switching Supply
• -15 dB Pad Switch

• Active Signal Patch
• Eliminates Hum and Buzz common to PCs
• 1/4" / RCA / 3.5mm Inputs for Any Source
• -15 dB Pad, Ground Lift Switch
• 48V Phantom Powered

• Equipped with Jensen Transformers
• -15 dB Pad Per Channel
• Flat Frequency Response
• Transformer-Isolated I/O
• 14-Gauge Steel Construction

• Connects a Mobile Device to a PA/Mixer
• 3.5mm TRS Male Plug on 5' Attached Cable
• Switchable -15 dB Pad
• Custom-Wound Transformers
• 2 x 1/4" TRS Outputs
• Balanced XLR 3-Pin Output

• Mix Two Channels to a Single Mono Output
• Individual Level Controls
• Balanced 1/4″ TRS and XLR Inputs
• Completely Passive, No Need for Power

• Nickel-plated plugs for rugged durability and efficient signal transfer
• Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
• OFC spiral shields for effective EMI and RFI rejection and flexibility

Passive DI Box. Instrument/Line in switch. Ground lift switch to eliminate hum.

• 2-Channel Bass Preamp
• Drive 2 Basses to Amp or PA
• EQ & Volume Control Per Channel
• Switchable Effects Loop
• Boost/Mute Function
• Balanced XLR Output

• Amp & Cab Simulator in Pedal Form
• Combo, Stack & 4x12 Cab Settings
• Presence Switch to Add Highs
• 180° Polarity Reverse Switch
• Ground Lift Switch

• Handles Extreme Signal Levels
• Built-In Jensen JT-DB-PEC Transformers
• 1.4", RCA, 3.5mm & XLR Inputs
• Pad, Polarisation, Ground-Lift Switches